Description
Product Features
• Adjustable feet for full access underneath the machine for cleaning.
• Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.
• Large counter balanced inspection doors allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
• Self-draining wash pumps provide maximum hygiene and all wash and rinse zones drain automatically at the push of a button.
Electric
| Supply voltage | 380-415V / 3Nph / 50Hz |
|---|---|
| Default Installed Power | 32.8 kW |
| Electrical power min | 25.8 kW |
When the machine runs at DIN 10510 compliant speed.
| Energy consumption | 27.9 kW/h |
|---|
At average working conditions.
| Pre-wash tank heating elements | 14 kW |
|---|---|
| 1st wash tank heating elements | 14 kW |
| Triple tank heating elements | 7 kW |
| Boiler heating elements | 7 kW |
| Pre-wash pump size | 1.5 kW |
| 1st wash pump size | 1.5 kW |
| Rinse pump size (final, duo, triple) | 0.55 / 0.32 / 0.32 kW |
Water
| Inlet water line size | G 3/4″ / G 3/4″ |
|---|---|
| Inlet cold water line size | G 3/4″ |
| Drain line size | 50 mm |
| Inlet water supply pressure | 1.5-7 bar |
| Inlet water supply temperature (wash) | 5 – 65°C |
The higher the temperature, the faster the warm-up. Recommended temperature: 50°C
| Inlet water supply temperature (rinse and pre-wash) | 5 – 30 °C |
|---|---|
| Inlet water supply hardness | 0-14 °fH / 0-8°dH |
When below 7°fH/4°dH special detergent and rinse aid are needed.
| Peak rate of drain flow | 1.8 l/s |
|---|---|
| Pre-wash tank size | 70 l |
| 1st wash tank size | 70 l |
| Duo rinse tank size | 20 l |
| Inlet water supply temperature (wash) | 20 l |
| Flow rate of wash pump | 500 l/h |
| Triple rinse tank size | 20 l |
Key Information
| Rinse water consumption at max. speed (l/rack) | 0.4 |
|---|---|
| Rinse water consumption at max. speed (l/h) | 100 |
| Productivity per hour (slow speed) | 150 Basket / 2700 dishes |
| Productivity per hour (2° speed) | 168 racks / 3024 dishes |
| Productivity per hour (1° speed) | 250 racks / 4500 dishes |
| Pre-wash temperature | 0 °C |
| Duo rinse temperature | 75 / 80 °C |
| Final rinse temperature | 85 °C |
| Wash temperature | 55 – 65 °C |
| Triple rinse temperature | 70 – 75 °C |
| External dimensions, Width | 2970 mm |
| External dimensions, Height | 1785 mm |
| External dimensions, Depth | 895 mm |
| Height with door open | 2095 mm |
| Charging hole size (width) | 530 mm |
| Charging hole size (height) | 490 mm |
For transportation purpose only, the depth can be reduced to 795mm by removing the control box and the door handles.
| Net weight | 553 kg |
|---|---|
| Shipping weight | 640 kg |
| Shipping height | 1970 mm |
| Shipping width | 1040 mm |
| Shipping depth | 3450 mm |
| Shipping volume | 7.07 m³ |
| Noise level | <62 dBA |
| Reference norm used to measure the noise | IEC60335-2-58 annex AA |
| Table to table distance | 2970 mm |
Air Emission
| Air flow (entrance, exit) | 0 / 145m³ / h |
|---|---|
| Air temperature (entrance, exit) | 0 / 45 °C |
| Air humidity (entrance, exit) | 0 / 100 % r.h. |
The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
| Latent heat | 6200 W |
|---|---|
| Sensible heat | 5100 W |
This model requires a ventilation hood. Please refer to the attached “Recommended Exhaust Hood Design”.
